Adding additional handsets to DT-7X 4G base unit
Registration is the process of linking a new handset to the base. This base is compatible with the myhomefone™ handset and other GAP-compatible handsets. Handset battery must be fully charged, and you must be close to the base for registration. This instruction is to pair a new handset with your original base station.
Please contact support@myhomefone.com.au to request additional handsets
Please contact support@myhomefone.com.au to request additional handsets
- At the original base: Press and hold the PAGE button for 5-6 seconds till the red LED starts flashing.
- On the new handset: Press MENU/OK key. Scroll ▲/▼ key to select Registration. Press MENU/OK key and select the base. Press MENU/OK key and enter the PIN code (default 0000). Press MENU/OK key again. The handset will start to look for the base and the display will show Searching X. For successful registration a confirmation tone will be heard from the handset and an antenna mark appears, with the handset number for internal call use (icon appears at the top left of the display).
- Once the handset is registered to the base successfully, it will start to ring if you press the PAGE button on base.
Related Articles
Device Upgrade Instructions - 3G to 4G base unit
To activate your new 4G base station, remove the SIM card from your existing myhomefone 3G base station, and insert it into the new unit. To locate the SIM card, please look at the bottom of the myhomefone base - the image below shows the symbol ...User Manual 3G Home Phone
Please refer to the attached file belowFAQ - What is the range of the base unit speakerphone?
Base units should be installed in a central location of the home where there is satisfactory 4G mobile network coverage. The powerful built-in microphone and speaker can generally be heard from most areas of a small house, such as a townhouse ...FAQ - What is the maximum number of accessories that can operate from a single base unit?
Up to 9 of each type of RF transceiver can be paired to a Safe Home Hub base. For example, a single base could support 9 pendants, 4 smoke detectors, and 2 door sensors. Please reach out to our support team for more details. This article is intended ...Quickstart Guide 4G Home Phone
Please refer to the attached file below